×

Search

Search
Industry information
/
Home > NEWS > Industry information

Installation of Road Lights

Installation of Road Lights

Installation of Road Lights

Installation of Road Lights

详情

1. Based on the actual lighting needs of the work site, determine the installation location and method of the lamps and ballasts, and then prepare corresponding lengths of three core cables according to the distance from the lamps to the ballast contact and the distance from the ballast to the 220V power supply contact (the cables provided with the lamps can be used if the distance does not exceed 2 meters).

2. When the distance between the lamp and the ballast contact exceeds 2 meters, it is necessary to replace the three core cable. Use an Allen wrench to unscrew the six Allen bolts on the lamp housing, pull out the lamp body, remove the three core cable that comes with the lamp, and then connect the prepared three core cable according to the original wiring method.

3. Use a socket wrench to unscrew the fastening bolts on the ballast box cover, remove the box cover, and introduce one end of the three core cable of the lamp into the ballast chamber through the introduction device of the ballast output port. Connect the red wire, black wire (or blue wire), and yellow green wire to the 4th, 5th, and 6th terminals of the ballast, and then tighten the compression nut.

4. Insert one end of the prepared three core power cable through the input device of the ballast into the ballast chamber, and then connect the L wire (live wire), N wire (neutral wire), and ground wire to the wiring terminals of positions 1, 2, and 3 of the ballast, and tighten the compression nut.

5. Close the ballast box cover and tighten the fastening bolts, then connect the other end of the three core cable to a 220V power supply according to explosion-proof requirements.

6. When replacing a light bulb, first cut off the power supply, check if the suspension chain is properly hung, and then use an Allen wrench to unscrew the six Allen bolts on the lamp housing. Carefully pull down the lamp body to separate it from the lamp head housing. Unscrew the old bulb and replace it with a new one.


Previous: High power lamps are more suitable for using high pole lamps
Next: What is the correlation between solar photovoltaic modules and solar street lights?
Previous: High power lamps are more suitable for using high pole lamps
Next: What is the correlation between solar photovoltaic modules and solar street lights?

Hot News

12-26
2023
The basic structure and working principle of solar street lights

1. The basic structure and working principle of solar street lights1.1 Basic structure of solar street lightsSolar street lights mainly consist of solar cell co...

12-26
2023
LED solar street lights are outdoor lighting fixtures with many uses

Moreover, it is necessary to provide diverse and forward-looking outdoor lighting design methods according to the different seasons.LED solar street lights are ...

12-26
2023
The popularization of solar street lights meets the lighting needs of major residential areas

As a new energy source, solar street lights meet the requirements of environmentally friendly living, and the popularization of solar street lights meets the li...

12-26
2023
The use of solar street lights meets the policy requirements of social sustainable development

The use of solar street lights meets the policy requirements of social sustainable developmentNowadays, major cities are willing to use solar street lights to r...

12-26
2023
What is the correlation between solar photovoltaic modules and solar street lights?

Solar lighting is a use of photoelectric conversion skills and a representative of new power professions. It has the benefits of energy conservation, environmen...

12-26
2023
Installation of Road Lights

1. Based on the actual lighting needs of the work site, determine the installation location and method of the lamps and ballasts, and then prepare corresponding...

12-26
2023
High power lamps are more suitable for using high pole lamps

In outdoor lighting, LED floodlights play an important role. In some special occasions, such as squares, intersections, certain venues, etc., due to their uniqu...

12-26
2023
What advantages do city circuit lights have

Firstly, it is stable and reliable. The municipal circuit lights use stable and reliable municipal electricity as the power source, so there is no need to worry...

12-26
2023
Where is a suitable installation location for city circuit lights

Firstly, on both sides of the road, the city circuit light poles are like bright lights at night, illuminating the roads for pedestrians and vehicles, ensuring ...

12-26
2023
Skills for designing solar landscape lights in gardens

The techniques for designing garden solar landscape lights using Qianji Lighting include: firstly, the object of garden solar landscape lights is different from...

logo
img

Copyright © 2012-2024 Changzhou B A International Trading Co., Ltd. All rights reserved     Support：YuRui Network

×